Outdoor Deck Lighting I Am Having Problems With My Outdoor Decking Lights. The Lights Keep Tripping When I Switch Them On??
I am having problems with my outdoor decking lights. The lights keep tripping when I switch them on?? - outdoor deck lighting
The lights Fiberboard (2 sets - are low-voltage) transformers connected to a power strip without water. It is approx. Cable 6-meter band on the wall inside. The lights go out when we go on holiday. However, when I plug the processor in an extension without any problems. Unfortunately, this is too big to seal the box. Is this a problem with power strips or 6 meter cable?
|
4 comments:
Yes, you can be short or not properly test of time.
Call an electrician - not something to take a risk.
This looks like the earth, not a short movie. Where is this "gap" that occurs? Is the fuse in the plug into the socket inside, or is complementary to the CCD, the journey, or is the house of the CCD fuseboard?
The error might as shots from the outside or via cable.
Moisture outer band may be sufficient to a circuit breaker or damage or degraded 6m cable to trigger it.
This looks like the earth, not a short movie. Where is this "gap" that occurs? Is the fuse in the plug into the socket inside, or is complementary to the CCD, the journey, or is the house of the CCD fuseboard?
The error might as shots from the outside or via cable.
Moisture outer band may be sufficient to a circuit breaker or damage or degraded 6m cable to trigger it.
Post a Comment